Transfer Case Draining And Filling (G2011753): Draining

NOTE:

This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
This procedure contains illustrations showing certain components removed to provide extra clarity.

Raise and support the vehicle on a suitable 2 post lift.
Refer to: LIFTING .
Remove the engine undershield.
Refer to: ENGINE UNDERSHIELD - INGENIUM I4 2.0L DIESEL/INGENIUM I4 2.0L PETROL/TDV6 3.0L DIESEL/V6 S/C 3.0L PETROL .
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Remove the 2 caps.
- Remove the 2 nuts.
- Remove the bracket.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Remove the 3 bolts.
- Remove the bracket.
Position a container to collect any excessive fluid.
CAUTION: Make sure that the area around the component is clean and free of foreign material.

NOTE: Discard the fluid drain plug.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Remove the fluid drain plug and allow the fluid to drain.
CAUTION: Make sure that the area around the component is clean and free of foreign material.

NOTE: Discard the fluid drain plug.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Remove the fluid drain plug and allow the fluid to drain.