LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2021 >> F-Pace SVR >> Repair and Diagnosis >> Transmission >> Manual Trans >> Transfer Case - Vehicles With: 6S45 6-Speed Manual Transmission RWD/6S45 6-Speed Manual Transmission AWD -- F-Pace (X761) >> Transfer Case - Vehicles With: 6S45 6-Speed Manual Transmission AWD/6S45 6-Speed Manual Transmission RWD (G1904679) >> Removal And Installation >> Transfer Case Rear Output Seal (G2011758) >> Installation

Transfer Case Rear Output Seal (G2011758): Installation

  1. G11314284Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Using the special tool, install a new input shaft seal.

    Special Tool(s): JLR-307-695  , JLR-307-520-01 

  2. CAUTION: Apply a 3 mm diameter bead of Loctite™ WSK-M2G349-A4 or equivalent meeting Jaguar specification to the output flange.
    G11314285Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Install the output flange.

  3. G11314279Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Install a new nut and seal.

    Renew Part: Transfer case rear output shaft flange nut  Quantity: 1. 

  4. Install the rear driveshaft.

    Refer to: DRIVESHAFT - TDV6 3.0L DIESEL/V6 S/C 3.0L PETROL .

    Refer to: DRIVESHAFT - INGENIUM I4 2.0L DIESEL .

    Refer to: DRIVESHAFT - INGENIUM I4 2.0L PETROL .

scientia non olet · About LEMON Manuals