Pinpoint Test C: Clutch Drag
- C1: CHECK BRAKE FLUID LEVEL NOTE: The clutch hydraulic system is supplied with fluid from the brake fluid reservoir.
- Check the brake fluid level
Is the brake fluid level between the MAX and MIN marks on the brake fluid reservoir?
Yes
GO to C2.
No
Fill brake fluid. Check the brake and clutch hydraulic systems for leaks. Test system for normal operation
- Check the brake fluid level
- C2: TEST CLUTCH PEDAL FREE TRAVEL
- Operate clutch pedal manually to the point of resistance and release
- Measure the clutch pedal freeplay (the distance between fully released and the point of resistance)
Is the measured dimension less than 15 mm?
Yes
Install a new clutch assembly. Test the system for normal operation
No
Check the clutch cover assembly. GO to PINPOINT TEST B .