Wheel Alignment Specification - Rear - SVR
CAUTION:
Both toe links must be adjusted by an equal amount.
NOTE:
All figures are with vehicle at 'Showroom' ride height - full fluids, full tank of fuel, no occupants/luggage, tires inflated to normal pressures
| ITEM | LEFT | RIGHT | TOTAL/BALANCE | THRUST ANGLE | ||||
|---|---|---|---|---|---|---|---|---|
| Camber | Nominal | Tolerance | Nominal | Tolerance | Nominal | Tolerance - | - | - |
| Decimal degrees | -0.88° | ± 0.75° | -0.88° | ± 0.75° | 0.0° | ± 0.75° | - | - |
| Degrees/minutes | -53' | ± 45' | -53' | ± 45' | 0' | ± 45' | - | - |
| Toe | Nominal | Tolerance | Nominal | Tolerance | Nominal | Tolerance | Nominal | Tolerance |
| Decimal degrees | 0.10° | ± 0.10° | 0.10° | ± 0.10° | 0.20° | ± 0.14° | 0° | ± 0.07° |
| Degrees/minutes | 5°9' | ± 6' | 5°9' | ± 6' | 12' | ± 8' | 0' | ± 4' |