Wheel Alignment Specification - Front - All markets except Brazil
CAUTION:
Both tie rods must be rotated by an equal amount.
NOTE:
All figures are with vehicle at 'Showroom' ride height - full fluids, full tank of fuel, no occupants/luggage, tires inflated to normal pressures
| ITEM | LEFT | RIGHT | TOTAL/BALANCE | |||
|---|---|---|---|---|---|---|
| Camber | Nominal | Tolerance | Nominal | Tolerance | Nominal | Tolerance |
| Decimal degrees | -0.38° | ± 0.75° | -0.38° | ± 0.75° | 0.0° | ± 0.75° |
| Degrees/minutes | -23' | ± 45' | -23' | ± 45' | 0' | ± 45' |
| Castor | Nominal | Tolerance | Nominal | Tolerance | Nominal | Tolerance |
| Decimal degrees | 7.52° | ± 0.75° | 7.52° | ± 0.75° | 0° | ± 0.9° |
| Degrees/minutes | 7°31' | ± 45' | 7°31' | ± 45' | 0' | ± 54' |
| Toe | Nominal | Tolerance | Nominal | Tolerance | Nominal | Tolerance |
| Decimal degrees | - | - | - | - | 0.26° | ±0.20° |
| Degrees/minutes | - | - | - | - | 16' | ±12' |