Rear Stabilizer Bar - INGENIUM I4 2.0L Diesel/INGENIUM I4 2.0L Petrol/TDV6 3.0L Diesel/V6 S/C 3.0L RETROL (G1899819): Installation

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Install the ani-roll bar and retaining bolts.
  Torque: 60 Nm
  CAUTION:
  - Make sure new nuts are installed.
  - Use a wrench on the hexagon provided to prevent the ball joint rotating.
  Install the rear Stabilizer Bar Link retaining nuts.
  
  Renew Part: Stabilizer bar link retaining nut(s) Quantity: 1 .
  
  Torque
Stage 1: 40 Nm

Stage 2: 45°
Install the rear subframe.
Refer to: REAR SUBFRAME - INGENIUM I4 2.0L DIESEL/INGENIUM I4 2.0L PETROL/TDV6 3.0L DIESEL/V6 S/C 3.0L PETROL