Rear Shock Absorber - INGENIUM I4 2.0L Diesel/INGENIUM I4 2.0L Petrol/TDV6 3.0L Diesel/V6 S/C 3.0L Petrol (G1899817): Installation

CAUTION: Make sure that the boot is correctly install.

NOTE: Install the components in the noted removal positions.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Assemble the components.
- Renew the nut.
  Renew Part: Shock absorber upper mounting nut Quantity: 1 .
  
  Torque: 27 Nm
- Connect the shock absorber the wheel knuckle.
- Renew the nut.
  Renew Part: Shock absorber nut Quantity: 1 .
  
  Torque: 170 Nm
- Connect the shock absorber to the body.
- Renew the nuts.
  Renew Part: Shock absorber mounting retaining nut(s) Quantity: 2 .
  
  Torque: 80 Nm
Connect the wiring harness.
Install the fender splash shield.
Install the rear wheel and tire.
Refer to: WHEEL AND TIRE - INGENIUM I4 2.0L DIESEL/INGENIUM I4 2.0L PETROL/TDV6 3.0L DIESEL/V6 S/C 3.0L RETROL (G1967109)