Transmission Fluid Cooler (G1862910): Removal
WARNING: This page is about a different variant/trim than selected.
CAUTION:
- Before disconnecting any components, make sure the area is clean and free from foreign material.
When disconnected all openings must be sealed.
- Be prepared to collect escaping fluids.
NOTE:
- Removal steps in this procedure may contain installation details.
- Some variation in the illustrations may occur, but the essential information is always correct.
- Refer to: TRANSMISSION FLUID DRAIN AND REFILL .
- Refer to: COOLING SYSTEM DRAINING AND VACUUM FILLING .
Torque : 5 Nm