Pinpoint Test C: Timing Chain Rattle Noise Diagnosis
WARNING: This page is about a different car, the 2019 Jaguar F-Pace. However, it is still accessible from the selected car via links, so may be relevant.
- C1: TIMING CHAIN RATTLE
- Let engine sit off for a period of 30 mins with ignition and engine OFF.
- Make sure the hood is left open.
- Make sure the drivers door is left open.
- Switch ignition on.
- Make sure the vehicle is in PARK for automatic transmissions, and NEUTRAL for manual transmission.
Let the engine idle. Is there signs of irregular mechanical rattle noise?
Yes : Confirm the noise is loudest to rear of engine and matches the example animation sound file E260167 below. Continue to replace the timing chains. Refer to: TIMING CHAIN(S), GUIDE(S) AND TENSIONER(S) .
No : Continue diagnosis using the Service Information. Refer to: ENGINE - INGENIUM I4 2.0L DIESEL .
Refer to video.
multimedia:A supplement to the article is available.