LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2021 >> F-Pace SVR >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Fuel Charging And Controls - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol PHEV -- F-Pace/X761) >> Fuel Charging And Controls - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol - PHEV (G2006450) >> Removal And Installation >> Throttle Body (G1998242) >> Installation

Throttle Body (G1998242): Installation

WARNING: This page is about a different car, the 2023 Jaguar F-Pace and 2022 Jaguar F-Pace. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the throttle body. Renew the seal.

    Renew Part: Throttle body to intake manifold seal Quantity: 1  .

    Torque  : 12 Nm 

  2. CAUTION: Make sure that the alignment marks on the cooling hoses are aligned with the marks on the throttle body.
    G15621300Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Install the coolant hoses.

  3. Install the intake manifold assembly.

    Refer to: INTAKE MANIFOLD (G2029661)