LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2021 >> F-Pace SVR >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Engine Cooling - INGENIUM I6 3.0L Petrol -- F-Pace/X761) >> Engine Cooling - INGENIUM I6 3.0L Petrol (G2497428) >> Description And Operation >> Engine Cooling - INGENIUM I6 3.0L Petrol (G2497429) >> Overview

Engine Cooling - INGENIUM I6 3.0L Petrol (G2497429): Overview

WARNING: This page is about a different car, the 2023 Jaguar F-Pace and 2022 Jaguar F-Pace. However, it is still accessible from the selected car via links, so may be relevant.

The engine cooling system maintains the engine within an optimum temperature range under changing ambient and engine operating conditions. A pressurized expansion tank system is used which continuously separates the air from the cooling system and replenishes the system through a hose connected between the expansion tank and the thermostat. A continuous vent into the expansion tank, through a hose connected to the engine, prevents air locks from forming in the cooling system.

The engine cooling system also provides cooling for the following:

The engine cooling system also provides heating for the following:

The primary components of the engine cooling system are the following:

In cold climate markets, an optional block heater is available as a Retailer/Authorized Repairer fit accessory. The block heater is located in the cylinder block and is connected to a power supply though an external plug.