Electric Park Brake Actuator - V8S/C 5.0L Petrol (G2266720): Installation
- Install the new O-ring seal.
Renew Part: Electric park brake actuator fitting kit Quantity: 1 .
- Install the Electric Park Brake (EPB) actuator.
- Install and tighten the 2 bolts.
Torque: 8 Nm
- Connect the electrical connector.
- Install the new O-ring seal.
- Connect the startup battery ground cable.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT
- Connect the Jaguar Land Rover approved diagnostic equipment and disable the EPB maintenance position.
General Equipment: Jaguar Land Rover approved diagnostic equipment