Rear Armature - INGENIUM I4 2.0L Diesel/INGENIUM I4 2.0L Petrol/TDV6 3.0L Diesel/V6 S/C 3.0L Petrol (G1913638): Installation

• With assistance, install the rear armature.
• Install and tighten the 8 bolts.

  Torque  : 170 Nm 

• Install the rear bumper support bracket.
• Install and tighten the 5 bolts.

  Torque  : 10 Nm 

• Install the wiring harness at 4 clips.
• Connect the electrical connector.

Refer to: REAR BUMPER - INGENIUM I4 2.0L DIESEL/INGENIUM I4 2.0L PETROL/TDV6 3.0L DIESEL/V6 S/C 3.0L PETROL .