Pinpoint Test D: Clutch Pedal Pulsation

D1: TEST CLUTCH PEDAL
NOTE:
- If a new clutch assembly is installed in the unreleased position, some clutch judder may be experienced.
- If a new clutch assembly is installed, the new unit should be bedded-in (this may be accomplished through 1 hour of in-town driving or similar).
1. Check the clutch pedal shaft for lubrication
  Is the clutch pedal shaft sufficiently lubricated?
  
  Yes
  
  Check the flywheel
  
  No
  
  Lubricate the clutch pedal shaft. Test the system for normal operation