General Equipment
CAUTION:
Nuts and bolts must be tightened with vehicle at normal ride height.
NOTE:
- This procedure contains some variation in the illustration depending on the vehicle specification, but essential information is always correct.
- This procedure contains illustrations showing certain components removed to provide extra clarity.
- This procedure contains illustrations for right side components, left side components are similar.
- Raise and support the vehicle on a suitable 2 post lift.
Refer to: LIFTING
- Remove the wheel and tire assembly.
Refer to: WHEEL AND TIRE - V8 S/C 5.0L PETROL
Using the transmission jack support the rear suspension.
General Equipment: Transmission jack
- Release the parking brake wiring harness.
- Release the brake pad wiring harness.
- Remove and discard the upper control arm nuts and bolts.
- Remove the upper control arm.
- Remove the wiring harness brackets.