Upper Arm - INGENIUM I4 2.0L Diesel/INGENIUM I4 2.0L Petrol/TDV6 3.0L Diesel/V6 S/C 3.0L Petrol (G1899815): Installation

CAUTION: Install new nuts and bolts.

Install the upper arm.

Renew Part: Rear suspension upper arm to subframe bolt Quantity: 1 .

Renew Part: Rear suspension upper arm to subframe nut Quantity: 1 .

Renew Part: Rear upper arm to wheel knuckle nut Quantity: 1 .

Renew Part: Rear upper arm to wheel knuckle bolt Quantity: 1 .

Torque

Stage 1: 60 Nm

Stage 2: 60°
Install the rear wheel tire.
Refer to: WHEEL AND TIRE - INGENIUM I4 2.0L DIESEL/INGENIUM I4 2.0L PETROL/TDV6 3.0L DIESEL/V6 S/C 3.0L RETROL (G1967109)
Use the Jaguar Land Rover (JLR) approved wheel alignment equipment, check and if necessary adjust the wheel alignment. SRO 576515 Rear Wheel Alignment - check and adjust to be claimed separately. Refer to: WHEEL ALIGNMENT