Input Shaft Seal (G1579986): Installation
WARNING: This page is about a different car, the 2019 Jaguar F-Pace. However, it is still accessible from the selected car via links, so may be relevant.
- CAUTION:
- Install a new seal.
- Take extra care not to damage the edges of the component.
Special Tool(s): JLR-308-845
Renew Part: Input shaft seal Quantity: 1 .
-
CAUTION: Be prepared to collect escaping fluids.
Special Tool(s): 307-613
-
CAUTION: Make sure the torque converter is fully located into the oil pump drive.
- Refer to: TRANSMISSION .