LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2021 >> F-Pace R-Dynamic S >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (Engine Cooling - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol PHEV -- F-Pace/X761) >> Engine Cooling - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol - PHEV (G2498297) >> Removal And Installation >> Thermostat Housing (G1998228) >> Installation

Thermostat Housing (G1998228): Installation

WARNING: This page is about a different car, the 2023 Jaguar F-Pace and 2022 Jaguar F-Pace. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the thermostat housing.

      Torque  : 12 Nm 

  2. Connect the 2 electrical connectors.
    • Connect the coolant bypass hose to the thermostat housing.

      Torque  : 7 Nm 

    • Install the purge valve assembly.
    • Install the breather pipe.
    • Connect the electrical connector.
  5. Connect the coolant outlet hose to the thermostat housing.
  6. Connect the 2 coolant hoses.
  7. Install the NVH  pad.
  8. Fill the cooling system.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING (G1998221)  .

  9. Install the engine cover.

    Refer to: ENGINE COVER - INGENIUM I4 2.0L PETROL .

scientia non olet · About LEMON Manuals