LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2021 >> F-Pace R-Dynamic S >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (Engine Cooling - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol PHEV -- F-Pace/X761) >> Engine Cooling - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol - PHEV (G2498297) >> Removal And Installation >> 5-Way Manifold (G2328361) >> Removal

5-Way Manifold (G2328361): Removal

WARNING: This page is about a different car, the 2023 Jaguar F-Pace and 2022 Jaguar F-Pace. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. Raise and support the vehicle on a suitable 2 post lift.

    Refer to: LIFTING .

  2. Drain the cooling system.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING (G1998221)  .

  3. Remove the intake air resonator.

    Refer to: INTAKE AIR RESONATOR (G2020091) .

  4. See Figure
    CAUTION: Be prepared to collect escaping coolant.
    G15620956Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Disconnect the 5 pipes from the 5-way manifold.

  5. See Figure
    G15620957Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Remove the bolt.
    • Remove the fastener.
    • Remove the 5-way manifold bracket assembly.