Oil Pump (G2046497): Installation

WARNING: This page is about a different car, the 2023 Jaguar F-Pace and 2022 Jaguar F-Pace. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Install a new O-ring seal.

Install the oil pump and the 4 retaining bolts.

Renew Part: Oil pump O-ring seal Quantity: 1 .

Torque : 25 Nm
Secure the 4 wiring harness retaining clips to the engine.
Connect the oil pump electrical connector.
CAUTION: Make sure a new oil pump sprocket bolt is installed.
- Install the oil pump chain and the gear assembly.
- Make sure that the oil pump sprocket is aligned with the oil pump shaft correctly.
- Using the special tool to hold the oil pump sprocket, install and tighten the bolt.
  Special Tool(s): 205-053
  
  Renew Part: Oil pump gear bolt Quantity: 1 .
  
  Torque
  1. Stage 1: 60 Nm
  2. Stage 2: 90°
Install the oil pan.
Refer to: OIL PAN - RWD (G2043356) .
Connect the startup battery ground cable.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT (G2623442) .