LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2021 >> F-Pace R-Dynamic S >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Engine - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol PHEV -- F-Pace/X761 (Removal & Installation - Installation)) >> Engine - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol - PHEV (G2412673) >> Removal And Installation >> Oil Cooler - Vehicles With: PHEV (G2756536) >> Removal

Oil Cooler - Vehicles With: PHEV (G2756536): Removal

WARNING: This page is about a different car, the 2023 Jaguar F-Pace and 2022 Jaguar F-Pace. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. Disconnect the 12V system.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT .

  2. Raise and support the vehicle on a suitable 2-post lift.

    Refer to: LIFTING .

  3. Remove the turbocharger.

    Refer to: TURBOCHARGER (G2270371) .

  4. CAUTION: Be prepared to collect escaping coolant.
    G15617766Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Remove the oil cooler hose.

  5. CAUTION: Be prepared to collect escaping fluids.
    G15617767Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Remove the 7 bolts.
    • Remove the oil cooler.
    • Remove and discard the gasket.
scientia non olet · About LEMON Manuals