Block Heater (G2131608): Removal
NOTE:
- This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
- This procedure contains illustrations showing certain components removed to provide extra clarity.
- Disconnect the startup battery ground cable.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT .
- Raise and support the vehicle on a suitable 2 post lift.
Refer to: LIFTING .
- Drain the coolant system.
Refer to: COOLING SYSTEM DRAINING AND VACUUM FILLING .
- Remove the exhaust manifold.
Refer to: LEFT EXHAUST MANIFOLD .
-
CAUTION: Be prepared to collect escaping coolant.
- Disconnect the electrical connector.
- Remove the block heater.