Coolant Pump (G1829880): Installation
WARNING: This page is about a different variant/trim than selected.
- Install the coolant pump.
Torque: 9 Nm
- Connect the 2 coolant hoses.
-
- Connect the coolant pump electrical connector.
- Install the 2 wiring harness clips.
- Install the left air cleaner outlet pipe.
Refer to: LEFT AIR CLEANER OUTLET PIPE .
- Install the left air cleaner.
Refer to: LEFT AIR CLEANER .
- Fill the cooling system.
Refer to: COOLING SYSTEM DRAINING AND VACUUM FILLING .
- Connect the startup battery ground cable.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT .