LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2021 >> F-Pace Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Engine - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol PHEV -- F-Pace/X761 (Specifications - Removal & Installation)) >> Engine - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol - PHEV (G2412673) >> Removal And Installation >> Oil Pump Drive Chain - Vehicles With: PHEV (G2756533) >> Installation

Oil Pump Drive Chain - Vehicles With: PHEV (G2756533): Installation

WARNING: This page is about a different car, the 2023 Jaguar F-Pace and 2022 Jaguar F-Pace. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Make sure the groove on the gear and oil pump shaft are aligned.

    Install the oil pump drive chain with the gear.

    • Install the special tool.

      Special Tool(s): 205-053 

    • Hold against the oil pump gear and install the new bolt.

      Renew Part: Oil pump gear bolt Quantity: 1 . 

      Torque 

      1. Stage 1: 30 Nm 
      2. Stage 2: 70° 
    • Remove the special tool.
  3. Install the oil pan.

    Refer to: OIL PAN - AWD (G2498224) 

  4. Connect the 12V system.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals