Oil Pump - Vehicles With: PHEV (G2756534): Installation

WARNING: This page is about a different car, the 2023 Jaguar F-Pace and 2022 Jaguar F-Pace. However, it is still accessible from the selected car via links, so may be relevant.

- Install the new gasket.
  Renew Part: Oil pump gasket Quantity: 1 .
- Install the pickup pipe to the oil pump.
- Install and tighten the 2 bolts.
  Torque : 11.5 Nm
- Install the new gasket to the oil pump.
  Renew Part: Oil pump gasket Quantity: 1 .
- Install the oil pump.
- Install and tighten the 4 bolts.
  Torque : 25 Nm
- Attach the wiring harness at 3 clips.
- Install the new O-ring seal to the electrical connector.
  Renew Part: Oil pump wiring harness O-ring seal Quantity: 1 .
- Attach the electrical connector into the cylinder block.
Install the oil pump drive chain.
Refer to: OIL PUMP DRIVE CHAIN - VEHICLES WITH: PHEV (G2756533)
Connect the 12V system.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT