LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2021 >> F-Pace Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Engine - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol PHEV -- F-Pace/X761 (Specifications - Removal & Installation)) >> Engine - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol - PHEV (G2412673) >> Removal And Installation >> Crankshaft Front Seal - Vehicles With: PHEV (G2756531) >> Installation

Crankshaft Front Seal - Vehicles With: PHEV (G2756531): Installation

WARNING: This page is about a different car, the 2023 Jaguar F-Pace and 2022 Jaguar F-Pace. However, it is still accessible from the selected car via links, so may be relevant.
  1. G15617700Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Use the special tool to install the crankshaft front seal.

    Special Tool(s): JLR-303-1628 

    Torque  : 26 Nm 

  2. Install the crankshaft pulley.

    Refer to: CRANKSHAFT PULLEY - VEHICLES WITH: PHEV (G2756530) 

  3. Connect the 12V system.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals