Auxiliary Radiator (G1998223): Removal

WARNING: This page is about a different car, the 2023 Jaguar F-Pace and 2022 Jaguar F-Pace. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
This procedure contains illustrations showing certain components removed to provide extra clarity.

- Raise and support the vehicle on a suitable 2 post lift.
  Refer to: LIFTING .
Remove the engine undershield.
Refer to: ENGINE UNDERSHIELD - V8 S/C 5.0L PETROL .
Partially drain the cooling system.
Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING (G1998221) .
Remove the front right wheel arch liner.
Refer to: FRONT WHEEL ARCH LINER .
See Figure
CAUTION: Be prepared to collect escaping coolant.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Disconnect the upper coolant hose.
- Reposition the upper coolant hose away from the auxiliary radiator.
See Figure
CAUTION: Be prepared to collect escaping coolant.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Disconnect the lower coolant hose.
- Reposition the lower coolant hose away from the auxiliary radiator.
See Figure

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Remove the auxiliary radiator bracket bolt.
See Figure

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Remove the 2 auxiliary radiator bolts.
- Release the 3 clips.
- Remove the auxiliary radiator.