LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2021 >> F-Pace Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (Engine Cooling - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol PHEV -- F-Pace/X761) >> Engine Cooling - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol - PHEV (G2498297) >> Removal And Installation >> Auxiliary Coolant Pump (G2034835) >> Installation

Auxiliary Coolant Pump (G2034835): Installation

WARNING: This page is about a different car, the 2023 Jaguar F-Pace and 2022 Jaguar F-Pace. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Only carry out this step if previously removed.

    Install the auxiliary coolant pump to the mounting bracket.

  2. Install the auxiliary coolant pump mounting bracket.
  3. Connect the electrical connector.
  4. Connect the 2 coolant hoses.
  5. Secure the coolant valve assembly.
  6. Fill and bleed the cooling system.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING (G1998221)  .

scientia non olet · About LEMON Manuals