Rear Tie-Rod (G2187520): Removal

CAUTION: Nuts and bolts must be tightened with vehicle at normal ride height.

NOTE:

This procedure contains some variation in the illustration depending on the vehicle specification, but essential information is always correct.
This procedure contains illustrations showing certain components removed to provide extra clarity.

Before replacing the rear tie-rod, make sure to have followed the diagnosis and testing procedure.
Refer to: SUSPENSION ARMS .
Raise and support the vehicle on a suitable 2 post lift.
Refer to: LIFTING .
CAUTION: Discard the nut and bolt.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Remove the nut and bolt.
CAUTION: Discard the nut.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Remove the nut and bolt.
- Remove the tie-rod.