Instrument Panel Lower Trim Panel (G2174359): Installation
-
- Install the diagnostic connector.
- Connect the 3 electrical connectors.
- Install the 2 clips.
- Install the instrument panel lower trim.
- Install and tighten the instrument panel lower trim screw.
Torque : 1.5 Nm
-
- Connect the cigar lighter electrical connector.
- Install the instrument panel center trim.
-
- Connect the 3 electrical connectors.
- Install the floor console upper trim.
- Install and tighten the 2 screws.
Torque : 1.5 Nm
- Install the floor console rubber mat.
- Install and tighten the 2 screws.
Torque
Upper Screw: 1.5 Nm
Lower Screw: 8 Nm
- Install the instrument panel outer trim panel.
-
- Install and tighten the 4 instrument panel lower trim screws.
Torque : 4.1 Nm
-
- Connect the 2 electrical connectors.
- Install the instrument cluster surrounding trim.
- Install the steering column upper trim.
- Reposition the steering column.