LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transmission/Transaxle Cooling - Vehicles With 8HP45 8 - Speed Automatic TRANSMISSIONAWD/8HP45 8 - Speed Automatic Transmission RWD/8HP70 8 - Speed Automatic Transmission AWD/8HP70 8-Speed Automatic Transmission RWD -- XF/(X260) >> Transmission/Transaxle Cooling - INGENIUM I4 2.0L Petrol, Vehicles With: 8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD >> Removal And Installation >> Transmission Fluid Cooler - INGENIUM I4 2.0L Petrol >> Installation

Transmission Fluid Cooler - INGENIUM I4 2.0L Petrol: Installation

    • Install the transmission fluid cooler assembly.
    • Install the bolt and tighten, to secure the transmission cooler assembly to the bracket.

    Torque  : 5 Nm 

  2. Install the 2 transmission cooler tubes to the transmission cooler assembly.
  3. Install the 2 coolant pipes to the transmission cooler assembly.
    • Install the front left lower fender splash shield.
    • Install the 3 clips securing the lower fender splash shield to the vehicle body.
  5. Fill the coolant system.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING

  6. Fill the transmission fluid system.

    Refer to: TRANSMISSION FLUID DRAIN AND REFILL

  7. Lower the vehicle.
scientia non olet · About LEMON Manuals