Wheel Alignment Specification - Rear Sportbrake
CAUTION:
Both tie-rods must be rotated by an equal amount.
NOTE:
All figures are with vehicle at 'Showroom' ride height - full fluids, full tank of fuel, no occupants/luggage, tires inflated to normal pressures
| ITEM | UNITS | LEFT | RIGHT | TOTAL/BALANCE | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Camber | Nominal | Tolerance | Min/Max | Nominal | Tolerance | Min/Max | Nominal | Tolerance | Min/Max | |
| Decimal degrees | -0.94° | ± 0.75° | -1.69°/0.19° | -0.94° | ± 0.75° | -1.69°/0.19° | 0.0° | ± 0.75° | -0.75°/0.75° | |
| Degrees/Minutes | -56' | ± 0.45' | -1°41'/11' | -56' | ± 0.45' | -1°41'/11' | 0' | ± 0.45' | -45'/45' | |
| Toe | Nominal | Tolerance | Min/Max | Nominal | Tolerance | Min/Max | Nominal | Tolerance | Min/Max | |
| Decimal degrees | 0.07° | ± 0.08° | 0.01°/0.15° | 0.07° | ± 0.08° | 0.01°/0.15° | 0.14° | ± 0.12° | 0.02°/0.26° | |
| Degrees/Minutes | 4' | ± 5' | 0°-1'/9' | 4' | ± 5' | 0°-1'/9' | 8' | ± 7' | 0°1'/15' | |
| Thrust angle | Nominal | Tolerance | Min/Max | Nominal | Tolerance | Min/Max | Nominal | Tolerance | Min/Max | |
| Decimal degrees | - | - | - | - | - | - | 0.0° | ± 0.06° | -0.06°/0.06 | |
| Degrees/Minutes | - | - | - | - | - | - | 0' | ± 4' | -4'/4' | |