Control Diagram - 2 Of 2 - Starting System With Auto Stop/Start
WARNING: This page is about a different variant/trim than selected.
A = HARDWIRED; AM = HIGH SPEED (HS) CONTROLLER AREA NETWORK (CAN) CHASSIS SYSTEM BUS; AN = HS CAN POWERTRAIN SYSTEM BUS; AO = MEDIUM SPEED (MS) CAN BODY SYSTEM BUS; AV = HS CAN COMFORT SYSTEM BUS .
| ITEM | DESCRIPTION |
|---|---|
| 1 | Powertrain Control Module (PCM) |
| 2 | Remote Function Actuator (RFA) |
| 3 | Jaguar Drive Switchpack (JDS) |
| 4 | Body Control Module/Gateway Module (BCM/GWM) assembly |
| 5 | Instrument Cluster (IC) |
| 6 | Anti-lock Brake System (ABS) control module |
| 7 | Transmission Control Switch (TCS) |
| 8 | Engine Junction Box (EJB) 2 |
| 9 | Starter motor |
| 10 | Ground |
| 11 | Power supply |
| 12 | Brake vacuum switch |
| 13 | Accelerator Pedal Position (APP) sensor |
| 14 | Ambient Air Temperature (AAT) sensor |
| 15 | Crankshaft Position (CKP) sensor |
| 16 | Ambient Air Temperature (AAT) sensor |
| 17 | Brake pedal switch |
| 18 | Transmission Control Switch (TCS) - park/neutral signal |
| 19 | Stop/start switch |