Ignition Coil-On-Plug : Installation

1. Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

   Torque  : 7 Nm 

2. Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

3. Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

4. Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

5. Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

   Torque  : 7 Nm 

6. Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

7. CAUTION: To prevent contamination, make sure to install the oil filler cap after removing the sound proofing pad.

   Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

8. Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

9. Install the engine cover.

   Refer to: ENGINE COVER - V6 S/C 3.0L PETROL

10. Connect the startup battery ground cable.

Refer to: STARTUP BATTERY DISCONNECT AND CONNECT