Fuel Pump Camshaft - AWD (G1897800): Removal
WARNING: This page is about a different variant/trim than selected.
NOTE:
- Some illustrations may show the engine removed for clarity.
- Some variation in the illustrations may occur, but the essential information is always correct.
- Removal steps in this procedure may contain installation details.
- Disconnect the battery ground cable.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Refer to: OIL PAN - AWD (G1895988)
Make sure that the crankshaft is in the timed position.
-
CAUTION: Using a suitable tool, hold the oil pump gear when removing the centre bolt.
-
CAUTION: Take extra care when removing the component, prevent damage to the fuel pump.