LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine V6 S/C 3.0L Petrol -- XF/(X260) (2 Of 2)) >> Engine - V6 S/C 3.0L Petrol (G2289428) >> Installation >> Engine - RWD >> General Equipment

General Equipment

WARNING: This page is about a different variant/trim than selected.
EQUIPMENT NAME
Hydraulic jib crane
WARNING: Be prepared to collect escaping fluids.
CAUTION: Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.
NOTE:
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  1. CAUTION: Take care not to damage surrounding components.
    G11310463Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Use a suitable hydraulic jib crane to install the engine assembly.

    General Equipment: Hydraulic jib crane 

  2. G11287264Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Install the engine support bracket.

    Special Tool(s): 303-021 

  3. G11310362Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Install and tighten the engine mounting nut.

    Torque:  60 Nm

  4. G11310361Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Install and tighten the engine mounting nut.

    Torque:  60 Nm

  5. NOTE: If equipped
    G11309746Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Reposition the ground cable to the correct position.
    • Install and tighten the bolt.

      Torque:  10 Nm

  6. G11310359Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Remove the bolt.
    • Remove the special tool.

      Special Tool(s): 303-1435 

  7. G11310358Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Remove the bolt.
    • Remove the special tool.

      Special Tool(s): 303-1436 

  8. G11310357Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Install the bracket.
    • Install and tighten the bolt.

      Torque:  25 Nm

  9. G11310353Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Reposition the cable to the correct position.
    • Install and tighten the nut.

      Torque:  12 Nm

  10. G11310352Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Install the cover.

  11. G11310351Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Reposition the Air Conditioning (A/C) compressor to the correct position.
    • Install and tighten the 3 bolts.

      Torque:  25 Nm

    • Install the wiring harness clip.
    • Connect the electrical connector.
  12. G11310354Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Reposition the transmission oil cooler and pipe assembly to the correct position.
    • Install and tighten the nut.

      Torque:  9 Nm

  13. G11312969Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Install the transmission oil cooler bracket.
    • Install and tighten the 2 bolts.

      Torque:  9 Nm

  14. G11312949Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Install the transmission oil cooler to the bracket.
    • Install and tighten the bolt.

      Torque:  9 Nm

  15. NOTE: If equipped.
    G11312951Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Install the trim panel.
    • Install the clip.
    • Install the 3 retainers.
  16. NOTE: If equipped.
    G11291683Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Install the trim panel.
    • Install the 2 retainers.
  17. G11310350Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Reposition the accessory drive belt tensioner.
    • Install the accessory drive belt.
    • Release the accessory drive belt tensioner to tension the accessory drive belt.
  18. G11310349Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Install both Noise, Vibration and Harshness (NVH) covers.
    • Install the oil filler cap.
  19. G11308812Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Reposition the vacuum pipe assembly to the correct position.
    • Connect the 2 vacuum pipe connectors.
  20. WARNING: Be prepared to collect escaping fuel.
    G11310347Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Reposition the 2 fuel lines to the correct position.
    • Connect the 2 fuel line connectors.
  21. G11310346Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Install the coolant hose assembly.
    • Connect the 2 coolant hose connectors.
    • Install the coolant hose clamp.
    • Connect the electrical connector.
  22. G11310345Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Install the coolant hose.
    • Connect the coolant hose connector.
    • Install the coolant hose clamp.
  23. G11310344Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Reposition the 2 coolant hoses into the correct position.
    • Connect the 2 coolant hose connectors.
  24. G11310343Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Install the coolant hose assembly.
    • Connect the 4 coolant hose connectors to the charge air cooler.
    • Install the 2 clips.
    • Reposition the lower coolant hose to the correct position.
    • Connect the lower coolant hose connector.
  25. G11310342Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Install the coolant hose assembly.
    • Connect the 2 coolant hose connectors.
    • Install the 2 coolant hose clamps.
    • Install the clip.
  26. G11310341Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Install the coolant pipe.
    • Connect the 3 coolant pipe connectors.
  27. Install the transmission.

    Refer to: TRANSMISSION - V6 S/C 3.0L PETROL

  28. Install the electric cooling fan and shroud.

    Refer to: ELECTRIC COOLING FAN AND SHROUD

  29. Vacuum fill the cooling system.

    Refer to: COOLING SYSTEM DRAINING AND VACUUM FILLING

  30. Install the hood.

    Refer to: HOOD

  31. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

  32. Check and top-up the engine oil level.

    Refer to: SPECIFICATIONS

  33. Bleed the fuel system.

Refer to: FUEL SYSTEM BLEEDING

scientia non olet · About LEMON Manuals