Right Engine Mount (G1850991): Removal
WARNING: This page is about a different variant/trim than selected.
NOTE:
- Removal steps in this procedure may contain installation details.
- Some components shown removed for clarity.
- Disconnect the battery ground cable.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT .
-
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
- Refer to: ENGINE UNDERSHIELD .
Torque : 60 Nm
Torque : 48 Nm
-
CAUTION: Use a wooden block to protect the oil pan when supporting the engine.
Using a suitable hydraulic jack, support the engine.
Torque : 48 Nm
Torque : 12 Nm
-
NOTE: Wiring harnesses shown removed for clarity.
Torque : 48 Nm