Oil Pan (G1850993): Removal
WARNING: This page is about a different variant/trim than selected.
NOTE:
- Removal steps in this procedure may contain installation details.
- Some variation in the illustrations may occur, but the essential information is always correct.
- Disconnect the battery ground cable.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT .
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Refer to: ENGINE OIL VACUUM DRAINING AND FILLING (G1850998)
-
NOTE:
- Do not disassemble further if the component is removed for access only.
- Remove and discard the O-ring seal.