LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine V6 S/C 3.0L Petrol -- XF/(X260) ( 1 Of 2)) >> Engine - V6 S/C 3.0L Petrol (G2289428) >> Removal And Installation >> Crankshaft Front Seal (G1850999) >> Installation

Crankshaft Front Seal (G1850999): Installation

WARNING: This page is about a different variant/trim than selected.
  1. CAUTION:
    • Do not over tighten the crankshaft front seal. Failure to follow this instruction may result in damage to the vehicle.
    • Take extra care not to damage the seal.

    Using the special tool install the new front crankshaft oil seal.

    Special Tool(s): 303-1434 

    Renew Part: Crankshaft front oil seal  Quantity: 1  .

  2. Install the crankshaft pulley.

    Refer to: CRANKSHAFT PULLEY (G1851000) 

  3. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT .

scientia non olet · About LEMON Manuals