LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- XF/(X260)) >> Electronic Engine Controls - V6 S/C 3.0L Petrol (G1818564) >> Removal And Installation >> Right Heated Oxygen Sensor (G1818189) >> Installation

Right Heated Oxygen Sensor (G1818189): Installation

WARNING: This page is about a different variant/trim than selected.
  1. NOTE: If the original sensor is to be installed, apply lubricant meeting specification ESE-M12A4-A to the thread of the sensor.
    • Using the special tool install the Heated Oxygen Sensor (HO2S).

      Special Tool(s): JLR-303-1666 

      Torque  : 48 Nm 

    • Connect the electrical connector and secure the clips.
  2. Install the exhaust system.

    Refer to: EXHAUST SYSTEM - STANDARD WHEELBASE

  3. Install the air deflector.

Refer to: ENGINE UNDERSHIELD

scientia non olet · About LEMON Manuals