Fuel Rail Pressure Sensor (G1818489): Installation

1. CAUTION: Make sure the threads are clean and free from fuel.
   NOTE: During lubrication, keep the component vertical as shown.

   Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

   • Lubricate with Molykote W15 as shown.
   • Install the fuel rail pressure sensor.

   Torque  : 35 Nm 

2. Connect the fuel rail pressure sensor.
3. Install the Noise, Vibration and Harshness (NVH) material.
4. Install the cowl panel.

   Refer to: COWL PANEL

5. Install the engine cover.

   Refer to: ENGINE COVER - V6 S/C 3.0L PETROL

6. Connect the startup battery ground cable.

Refer to: STARTUP BATTERY DISCONNECT AND CONNECT