LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- XF/(X260)) >> Electronic Engine Controls - V6 S/C 3.0L Petrol (G1818564) >> Removal And Installation >> Engine Coolant Temperature Sensor (G1818166) >> Installation

Engine Coolant Temperature Sensor (G1818166): Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the engine coolant temperature sensor and connect the electrical connector.
  2. Install the secondary bulkhead panel right.

    Refer to: SECONDARY BULKHEAD RIGHT PANEL - V6 S/C 3.0L PETROL

  3. Fill the coolant system.

    Refer to: COOLING SYSTEM DRAINING AND VACUUM FILLING

  4. Install the engine cover.

Refer to: ENGINE COVER - V6 S/C 3.0L PETROL

scientia non olet · About LEMON Manuals