Auxiliary Radiator (G2344914): Installation
WARNING: This page is about a different variant/trim than selected.
-
- Install the auxiliary radiator.
- Make sure the 3 clips are correctly installed.
- Install and tighten the 2 bolts.
Torque : 7 Nm
- Install and tighten the auxiliary radiator bracket bolt.
Torque : 7 Nm
- Connect the upper coolant hoses.
- Connect the lower coolant hoses.
- Install the front right wheel arch liner.
Refer to: the appropriate service information
- Vacuum fill the cooling system.
- Install the engine undershield.
Refer to: ENGINE UNDERSHIELD