5-Way Manifold (G2271344): Installation
WARNING: This page is about a different variant/trim than selected.
-
NOTE: This step is only required if previously removed.
- Install the 5-way manifold to the bracket.
- Install the 2 fasteners.
-
- Install the bracket.
- Install and tighten the bolt.
Torque : 7 Nm
- Install the fastener.
- Install the 5 pipes to the 5-way manifold.
- Install the Air Cleaner Outlet Pipe T-Connector.
Refer to: AIR CLEANER OUTLET PIPE T-CONNECTOR
- Refill the cooling system.