Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
This procedure contains illustrations showing certain components removed to provide extra clarity.

Raise and support the vehicle on a suitable 2 post lift.
Refer to: Lifting .
Remove the air defector.
Refer to: Air Deflector .
Remove the front halfshaft.
Refer to: Front Halfshaft .
Remove the halfshaft support bracket.
CAUTION: Be prepared to collect escaping fluids.
Discard the O-ring seal