LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Front Drive HALFSHAFTS -- XE (X760)) >> Front Drive HALFSHAFTS >> HALFSHAFT Support Bracket (G1899510) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Renew the O-ring seal.
    CAUTION: Make sure all the mating faces are clean and free from foreign material.

    Renew Part: Halfshaft support bracket o-ring seal. 

  2. Install the halfshaft support bracket.

    Torque Specification: 25 Nm 

  3. Install the front halfshaft.

    Refer to: Front Halfshaft .

  4. Install the air defector.

    Refer to: Air Deflector .

scientia non olet · About LEMON Manuals