LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Front Drive HALFSHAFTS -- XE (X760)) >> Front Drive HALFSHAFTS >> Front HALFSHAFT (G1895699) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new circlip.
    G11305860

    Renew Part: Circlip. 

  2. Install the halfshaft.
    CAUTION: Take extra care not to damage the seal.
    G11305862
  3. Install the yoke.
    CAUTION: Install a new nut and bolt.

    Renew Part: Shock absorber to yoke bolt. 

    Torque Specification: 73 Nm 

  4. Connect the yoke to the lower arm.
    CAUTION: Install a new nut and bolt.

    Renew Part: Lower control arm nut and bolt. 

    Torque Specification: 170 Nm 

  5. Install the wheel knuckle.

    Refer to: Wheel Knuckle - AWD .

  6. Fill the differential.

    Refer to: Differential Draining and Filling .

scientia non olet · About LEMON Manuals