Trip Computer

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

The trip computer memory stores data for a journey or series of journeys until it is reset to zero.

Trip A
Trip B
Trip auto.
Units:
- Miles
- Kilometers.
Trip content:
- Trip distance
- Average speed
- Average fuel
- Instant fuel
- Distance to empty
- Driving style.

There are 3 independent trip recordings available to view, Trip A, Trip B and Trip Auto. The 'Trip Computer' selection in the Main Menu is used to select which trip recording is displayed. The Trip A and Trip B memories can be set independently, while the Trip auto will reset after every ignition cycle as the vehicle moves.

Previous trips can be added to form a continuous trip recording by pressing and releasing the trip switch on the end of the left steering column multifunction switch when the automatic trip information is displayed. The message center will confirm that the previous journey information has been added and pressing and holding the trip switch for 3 seconds will add the data. The previous trip information can also be deleted by pressing and releasing the trip switch when the automatic trip information is displayed. The message center will confirm deletion of the previous journey data and pressing and holding the trip switch for 3 seconds will delete the previous trip information.

Trip A and B can be reset by the driver at any time. When the required trip information is displayed, pressing and holding the trip switch for 3 seconds will erase the previous trip information stored. Resetting trip A or B will not affect the other trip information, for example, if trip A is reset, trip B will retain its information until it is reset.

The trip computer readout replaces the odometer reading when the driver requests trip information display.

The display units may be changed in this menu.