Wiring Harness Cable Identification Sleeves

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

A selection of colored sleeves are available for maintaining the wiring harness cable identification on the pre-terminated lead.

The sleeve identification packs are available to suit the 3 cable size ranges of Red, Blue and Yellow. Each sleeve identification pack contains 50 of each of the following colored sleeves:

Black
Brown
Red
Orange
Yellow
Green
Blue
Violet
Grey
White
Place the correct colored sleeve(s) over the pre-terminated lead insulation as near to the electrical connector as possible with the main wiring harness cable color nearest to the electrical connector.

For example, if the original wiring harness cable color is green with a black trace, put the green wiring harness cable identification sleeve on the pre-terminated lead first, followed by a black sleeve, slide both sleeves along the wiring harness cable to the electrical connector terminal.