Approved Electrical Wiring Harness Repair Methods: Notes
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Several different types and sizes of terminal may be found in a single electrical connector housing.
It is necessary to identify:
- The conductor (wire) size of the affected wiring harness
- The electrical connector range from which the damaged wiring harness is to be removed
- The electrical terminal type
Use of the approved diagnostic tool will greatly assist in the quick identification of electrical connectors and faulty pin terminal(s).
Reference can also be made to the ERL and iEWD available through TOPIx, to identify wiring harness(s) and electrical connector(s).
Use the Electrical Wiring Harness Repair Relationship Table below to identify the correct splice connector to suit the wiring harness conductor (wire) size, which can be related to a suitable pre-terminated lead by the color of the insulation. The table also identifies the correct length of insulation to be stripped from the wiring harness lead.